Power Choke Tester DPG10 – 100B

This version has been developed especially for inductors with lower saturation current. The three measurement ranges are divided in 0.1 – 1.0 A, 1.1 – 10.0 A and 10.1 – 100.0 A. The measuring current is adjustable in steps of 0.1 A.

Additionally the resistance measurement was resized and covers a testing range of up to 35 Ω (however the inductance curve of test specimen with higher ohmic resistance can be measured also if resistance value is entered manual).

Measuring current, max. 0.1 – 100 A
Pulse energy, max. 1350 J
Pulse width, max. 3 µs – 70 ms adjustable
Pulse voltage 10 – 400 V adjustable
Resistance measurement 0.01 mΩ – 35 Ω
Dimensions 365 (W) x 325 (L) x 167 (H) mm³

The advantage of this version is the ability to measure chokes with smaller saturation current down to some 10 mA such as

  • current compensated chokes for PCB mounting

and/or coils with high fraction of the ohmic part such as

  • Solenoids
  • Solenoid valves
  • Eddy current brakes
  • and many others

pdf-icon-33Description and technical specifications of the Power Choke Tester DPG10

Scope of delivery

  • DPG10 – 100B
  • Cable set
    • Test leads 2x Force, 1x Sense, 0.6 m each with alligator clips
    • USB cable and RS232 cable
    • Power cord
  • PC software for Windows
  • Instruction manual
  • Calibration certificate
  • Library (DLL) for integration of the instrument in automated test environments using your own application or LabVIEW
  • Kelvin test leads (KK11-4)
  • Kelvin test leads for small devices under test (KK12-4)
  • Extra long test leads (KL11-4)
  • Hard-top case (CASE1)
  • Customer specific test leads on request